# How to document changing brake pads with your own photos in Creaza Canvas

Upload the photos from your phone under «Content» and «My files», and make one area with one photo and one text box for each step. Then choose «Present», make a slide around each area, and play it while you explain the work using the technical terms.

Video: [Changing brake pads – Creaza Canvas](https://help.creaza.com/en/canvas/change-brake-pads/)

## How this was made

1. The photos were taken with a phone in the workshop, one for each step of the job.
2. Click «Content» in the toolbar, or press Alt+I (Mac: ⌥+I), and choose «My files». Click «Upload photos», select the four photos and click «Upload». When the upload is done, click «Close». The photos are now ready in «My files».
3. The first area is a title: a photo of the brake pads and the text «Changing brake pads – How I did it».
4. For each step, zoom in on a new area. Click «Content», choose the photo in «My files», and add a text box with «Text», or Alt+T (Mac: ⌥+T). The text box says what you did and explains one technical term.
5. The term gets its own colour and is in bold, and the explanation is in smaller text in the same text box.
6. «1 Wheel off»: the wheel bolts were loosened with an impact wrench and the wheel taken off. The term «wheel bolts» means the bolts that hold the wheel to the hub. «2 The caliper»: the brake caliper was unbolted and hung up to protect the brake hose. The term «brake caliper» means the part that squeezes the brake pads against the brake disc when you brake.
7. «3 The pads»: the old pads were worn down to the wear limit, and the new ones are much thicker. The term «wear limit» means the minimum thickness of the friction material. «4 The piston»: the piston was pushed back with a special tool and the new pads fitted. The term «piston» means the part that presses the pad against the disc.
8. The last area, «5 Finally», says that the brake pedal was pumped until it was firm, the wheel bolts were tightened with a torque wrench, and the car was test-driven. Under «My technical terms», all four terms are listed in their colours. That is good support when you explain things orally.
9. Zoom out with Ctrl+- (Mac: ⌘+-) or Ctrl+1 (Mac: ⌘+1) to see all the steps. Choose «Present» in the toolbar, or press Alt+P (Mac: ⌥+P). The slide format is 16:9. With «Add Slide», make one slide around the whole canvas and one slide around each area.
10. Click «Play the presentation». The student explains the work step by step, using the technical terms.

## Keyboard shortcuts

- Go to the menu of the selected element (Tab moves between the buttons, Esc goes back): M
- Content (pictures, characters and backgrounds): Alt+I (Mac: ⌥+I)
- Text (new text box): Alt+T (Mac: ⌥+T)
- Bold: Ctrl+B (Mac: ⌘+B)
- Present: Alt+P (Mac: ⌥+P)
- Zoom out: Ctrl+- (Mac: ⌘+-)
- Show all elements: Ctrl+1 (Mac: ⌘+1)

## Good to know

- The images in this film are AI-generated. Take your own photos the next time you do a job in the workshop.
- Turn on bold with Ctrl+B (Mac: ⌘+B) when the word is selected.

## See also

- [Cutting a bob](https://help.creaza.com/en/canvas/cut-a-bob/): A work log from the salon with your own photos: shampooing, sectioning, guideline and blow-drying, with one technical term explained in each step.
- [Present a mind map](https://help.creaza.com/en/canvas/present-mindmap/): Make slides that zoom in on each branch, and play the presentation.
- [Format text](https://help.creaza.com/en/canvas/format-text/): Make the heading big and bold, change the font and color, and make a bullet list.
- [My design process](https://help.creaza.com/en/canvas/my-design-process/): A process log about a nest box with your own photos from woodwork: problem, ideas, sketch, prototype and evaluation, played as a presentation.

